The OctaMic includes extended features, turning it in more than
just a combined, dual QuadMic. Thanks to sophisticated discrete Class-A
technology, both state-of-the-art microphone preamps offer a pristine sound.
Lowest distortion, excellent signal to noise ratio and perfectly linear
frequency response transmit and amplify the microphone signals truly unchanged.
Additionally, detachable rack mount holders and full battery compatibility make
the OctaMic the perfect addition to (not only) the mobile Hammerfall DSP System.
OctaMic offers 8 balanced XLR mic / line inputs. Each channel
contains switches for 48V phantom power, a low cut filter and phase reversal.
Amplification can be set between 10 and 60 dB. LEDs for signal, clip, and
activated phantom power give a complete overview on the unit's status. When the
special Clip Hold mode is activated, any detected clip-state will cause the
corresponding LED to flash once per second. With this, the user gets a long term
peak detection, and no longer needs to constantly watch the LEDs. At the same
time momentary overloads are still displayed correctly.
Frontside switches include power on/off and output level, for a
choice of -10 dBV, +4 dBu or Hi Gain (+19 dBu) as reference level. This unusual
feature offers two advantages. First, the reference level can be easily switched
to match any of RME's current interface devices, from HDSP 9632 through
Multiface up to the renowned ADI-8 series converters. Second, the Signal to
Noise ratio is optimized, and the Clip-LED will exactly match the ones of the
ADI-8 (2 dB below 0 dBFS).
The balanced line level output signal is available at the back
of the unit via 8 stereo TRS jacks. The OctaMic also has a 25-pin D-sub
connector, which allows for a direct and lockable connection to RME's 8-channel
converters ADI-8 PRO and DS, with just one cable. Of course, this connector also
provides the ability to use an industry-standard breakout cable for 8 balanced
XLR outputs. The included professional switching power supply offers safe
operation world wide, even when the power lines are weak or noisy.
Furthermore, the OctaMic is RME's first unit to come in a
completely re-designed housing. A new front panel construction and design not
only gives a much better look, but also higher stability. Detachable rack mount
holders and soft edges all around the unit are some of the new and useful
The OctaMic D includes the optional OctaMic ADC module, which
can also be added to the OctaMic basic version later on. The ADC module adds 8
channels of pristine 192 kHz AD-conversion, available as double ADAT output
(S/MUX, up to 96 kHz), and simultaneously via DB-25 connector as 4 AES outputs
(up to 192 kHz). The ADC can be clocked internally (master), and externally via
word clock and AES sync.
RME's outstanding SteadyClock™ ensures perfect
AD-conversion, as jitter on the external sync-sources is nearly completely
removed. All settings are done via DIP-switches on the back of the OctaMic D.
Analog outputs and both digital outputs operate fully simultaneously. The choice
of reference level affects the analog outputs only, the signal/clip indication
and the AD-conversion will react only to the Gain-pots.
TECHNICAL SPECIFICATIONS AND
- Operates with voltages ranging from 7–30V DC oder AC,
allowing operation with practically any power source, including batteries
- 100% hum-free!
- High-quality switching power supply included, for worldwide
operation at 100-240 Volt
- Max. output level +21 dBu
- SNR: 129 dB EIN @ 150 Ohm
- THD: < 0.006% @ 30 dB Gain
- Frequency response: 5 Hz – 200 kHz, - 0.5 dB
- Unbeatable price/performance