Mon-Sat, 8am-6pm PST
PCI Audio Interfaces
3 Zigma Audio
Samplitude & Sequoia
Rupert Neve Designs
Sebatron Mic Preamps
VIEW ALL BRANDS
Limited Time Offers
RME HDSPe AIO
32-channel 24-bit/192kHz Audio Interface
The HDSPe AIO from RME makes the dream of an All-In-One audio solution come true! No matter what the application, this Advanced-Input-Output card excels, boasting the latest 192kHz AD/DA convertors and a signal to noise ratio of more than 112dB. For the first time, you can access all of the I/O simultaneously, including S/PDIF, AES/EBU, and more. This card was developed specifically for the PCI Express format and takes full advantage of this high-performance format. Add RME to your rig with the ADSPe AIO PCIe interface!
RME HDSPe AIO PCIe Audio Interface at a Glance:
Exceptional AD/DA conversion
Exceptional AD/DA conversion
The Advanced-Input-Output interface shines with the latest 192kHz A/D-D/A converters, with more than 112dB signal to noise ratio. All inputs and outputs are simultaneously operational, even SPDIF (phono) and AES/EBU (XLR). Additional hi-quality analog inputs and outputs can easily be added courtesy affordably priced expansion boards. TotalMix, the flexible routing mixer and SteadyClock, RME's clock technology with maximum jitter suppression of external clock signals, are on board too. HDSPe AIO also supports the optional TCO for synchronization to timecode (LTC/video).
HDSPe AIO is the newly developed PCI Express version of the HDSP 9632. A newly developed genuine PCI Express core consequently takes full advantage of the new format, achieving significant performance gains in multitrack audio and lowest latency. Thanks to RME's secure flash update technology, firmware improvements, adjustments, and bugfixes can be installed easily at any time.
RME HDSPe AIO PCIe Audio Interface Features:
Balanced stereo analog in- and output, 24-bit/192kHz, > 112 dB SNR
Optional analog expansion boards with 4 balanced in- or outputs
All analog I/Os capable of 192 kHz, constant number of available channels
1 ADAT digital I/O, supporting 192 kHz via S/MUX4 operation
1 SPDIF digital I/O, 192 kHz-capable
1 AES/EBU digital I/O, 192 kHz-capable
1 Stereo headphone output, separate DA-converter and playback device
So up to 18 inputs and 20 outputs can be used simultaneously!
1 MIDI I/O with 16 channels of hi-speed MIDI via breakout cable
DIGICheck, RME's unique metering- and analyzing tool
TotalMix: 760 channel Mixer with 42 bit internal resolution
Native PCI Express - no PCI to PCI Express bridge used
1 x Stereo Analog I/O (192 kHz)
1 x ADAT I/O (up to 192 kHz via S/MUX4)
1 x SPDIF I/O (192 kHz)
1 x AES/EBU I/O (192 kHz)
1 x MIDI I/O
1 x Phones Output (separate DAC, 192 kHz)
1-Lane PCI Express Endpoint device (no PCI Express to PCI Bridge), revision 1.1.
2.5 Gbps line speed
Packet-based full-duplex communication (up to 500 MB/s transfer rate)
Supported sample frequencies: Internally 32, 44.1, 48, 64, 88.2, 96, 176.4, 192 kHz. Externally 28 kHz - 200 kHz
8 buffer sizes/latencies available: 0.7 ms, 1.5 ms, 3 ms, 6 ms, 12 ms, 23 ms, 46 ms, 93 ms
All settings changeable in real-time
Automatic and intelligent master/slave clock control
Enhanced Mixed mode: All inputs and outputs simultaneously operational
TMS (Track Marker Support): Supports CD/DAT start-IDs and the read out of CD subcode
Unique status windows for record and playback, showing mode and sample rate
DIGICheck, RMEs unique metering and analyzing tool
Digital inputs and outputs ground-free transformer coupled
3-stage hardware level control for analog inputs and outputs
Balanced analog input and output, DC-coupled signal path
192 kHz / 24-bit converters. SNR 112 dB RMS unweighted, 115 dBA
Maximum input and output level (0 dBFS @ HiGain): +19 dBu
Low impedance headphone output (30 ohm), separate DAC and playback device
Super low jitter design: < 1 ns in all clock modes
For the complete list of
, enter your name and email address below.
KNIF Audio EKSA Mastering EQ
Online Payment System
Copyright © 2002-2018 Pro Audio Toys. All rights reserved.