Our REAL PRICE is too low to advertise!
Use the ECoupon code "saveon9652" during the checkout process and checkout the NEW price.
HDSP 9652 is the long-awaited successor of the well-known PCI card Project Hammerfall (DIGI9652). Like the original Hammerfall, HDSP 9652 offers 3 x ADAT optical I/O, ADAT-Sync In, SPDIF I/O and word clock I/O. On top, there are 2 MIDI I/Os and TotalMix, a DSP-based real-time mixer/router.
The HDSP 9652's Secure BIOS Technology allows to perform hardware updates via software/driver without any risk. And thanks to its unique 'Zero CPU Load' technology Hammerfall DSP guarantees highest performance and lowest latency on both notebooks and desktops!
Hammerfall also allows to connect Analog Expansion Boards (AEB). Two internal ADAT inputs and two internal ADAT outputs allow you to realize up to 16 analog inputs and 16 analog outputs directly inside the computer.
- 3 x ADAT digital I/O, based on RME's reliable Bitclock PLL
- 1 x SPDIF digital I/O, based on RME's reliable DIGI96 technology
- 1 x Breakout cable for coaxial SPDIF operation
- 1 x Word clock I/O (BNC) on included expansion board
- 1 x ADAT Sync In (9-pin D-type) for sample accurate transfers
- 2 x MIDI I/O, 32 channels high-speed MIDI via breakout cable
- HDSP Meter Bridge: freely scalable level meters, peak- and RMS calculation directly in hardware
- TotalMix: 1456 channel mixer with 40 bit internal resolution
- S/MUX poured in hardware: 12 channels 96 kHz/24 bit for record and
playback on ADAT optical
numerous other features found already in the Hammerfall series. And all this for an unbeatable price!
The Hammerfall® DSP System comes with drivers for Windows 98/ME (MME with multi-client operation, ASIO 2.0, GSIF), Windows 2000/XP (fully multi-client operation of MME, GSIF and ASIO 2.0 plus ASIO multi-client), Mac OS 9.x (ASIO 2.0, OMS MIDI) and Mac OS X (Core Audio, Core MIDI).
Just click on the hammer symbol in the systray of the taskbar and the settings dialog of the HDSP 9652 comes up. The clear structured, easy to understand window plus the unique informative status windows for input signal, clock mode, sample rate and time code make your work with Hammerfall DSP to a real pleasure. With a simple mouse click you gain access to the full power of your card.
TECHNICAL SPECIFICATIONS AND FEATURES
sample rates: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, variable
buffer sizes/latencies available: 1.5 ms, 3 ms, 6 ms, 12 ms, 23 ms, 46 ms,
93 ms, 186 ms
ASIO zero CPU load technology: 0 (zero!)% CPU load when
using ALL 52 channels!
All settings changeable in realtime
modes slave and master
Automatic and intelligent master/slave clock
Enhanced Mixed mode: All inputs and outputs simultaneously
Unsurpassed Bitclock PLL (audio synchronization) in ADAT®
Enhanced Zero Latency Monitoring for latency-free submixes and
perfect ASIO Direct Monitoring
Comes with DIGICheck: the ultimate
measurement, analysis and test tool
Input 3 x optical (TOSLINK), 1 x
coaxial (Cinch), 2 x MIDI, word clock (BNC)
Input format SPDIF,
AES/EBU (Consumer, Professional), ADAT® optical
Output 3 x optical
(TOSLINK), coaxial (Cinch), 2 x MIDI, word clock (BNC)
SPDIF, AES/EBU (Consumer/Professional), ADAT® optical
UNIQUE TECHNOLOGIES IN HAMMERFALL
Intelligent clock control according to
operational mode and present/desired sample rate.
The most reliable receiver circuit for ADAT optical
Scalable computer load according to the current
Monitoring of the input signal, independent from clock mode and sample rate.
Intelligent Clock Control
Measurement and display of all incoming and used clocks.
Latency Fast Change
Change latency on-the-fly under ASIO, without manual reset or re-boot.
Surveillance and sample accurate synchronization of all channels.
Comparison and display of all input clock status.
Zero Latency Monitoring (ZLM®)
Automatic monitoring of the input signal with zero latency.
Professional status and level display at
lowest CPU load.
TotalMix - Mixes all inputs and all outputs on all outputs. Several independent submixes possible.
All I/O boxes of the Hammerfall DSP System contain a hardware mixer in TotalMix technology. Any input and output can be routed and mixed to any output. Up to 14 independent submixes are available.
TotalMix not only leads to perfect and complete ASIO direct monitoring, but is also useful without ASIO. Thanks to a proprietary mixer surface, submix and Zero Latency Monitoring can be used with all audio applications. An external mixer thus becomes unnecessary in many cases.