Mon-Sat, 8am-6pm PST
3 Zigma Audio
Samplitude & Sequoia
Rupert Neve Designs
Sebatron Mic Preamps
VIEW ALL BRANDS
Limited Time Offers
Focal SM11 C 3-way Active Studio Monitor
with 1" Pure Beryllium tweeter (100W), 6.5" "W" Cone Midrange Driver (150W), 11" W Cone Woofer (250W), and Onboard DSP for Configuration - Center
When you need the kind of precision spacial field monitoring that's critical for producing commercially viable stereo and multi-channel audio, Focal's SM11 series studio monitors deliver! The design of the SM11 C complements the asymmetrical configuration of Focal's SM11 L (left) and SM11 R (right) monitors. This reenforce the crystal-clear phase-alignment of the stereo pair and provides imaging that really lets you dive into your mixes. If you know how vital a flat frequency response is for producing mixes that easily translate, then you'll appreciate how the SM11's extended 34Hz-40kHz (at -3dB) frequency response retains super-aural harmonic overtones - a characteristic that's essential for fine-tuning high-definition mixes.
The further beauty of Focal's SM11 studio monitors lies in the details. For instance, the Beryllium TBU inverted dome tweeter in the SM11 is an advancement on the standard inverted dome tweeter found at the heart of many Focal studio monitors, which allows the tweeter alone to comfortably cover five full octave ranges, from 1-40kHz. The SM11's 6.5" "W" composite (glass, foam, glass) midrange driver is responsible for the incredible neutrality and transparency that all Focal monitors are known for.
These two drivers are balanced out by a third, an 11" woofer that uses an 11" inverted passive radiator with a "W" composite sandwich cone piston, rather than a traditional open port. This provides the SM11 with incredible low-frequency detail, even without the added support of a subwoofer, and none of the boomy-ness and false-lows of a traditional ported design. The combined effect of all three of these precision drivers together is 118dB maximum SPL, which leaves plenty of headroom and allows you to mix at extreme levels without inadvertently introducing compression or distortion. The result: unblemished and super-accurate sound that provides you with intense sound field imaging.
SM11 studio monitors also feature high-quality digital chipsets, which provide incredible onboard DSP for fine-tuning. When combined with included Focal Manager software, this onboard DSP lets you perfectly define your space and taylor your sweet spot. EQ controls for each SM11 studio monitor within your setup provide recallable pin-point tuning setups. To ensure that no details are lost in translation, SM11s feature 24-bit/96kHz internal converters. SM11 studio monitors accept direct AES/EBU input, in addition to standard analog XLR inputs, giving you the option to include your favorite D-to-A converters in the signal chain. You can also bypass the digital signal processing in your SM11s altogether.
Focal SM11 C (Center) Studio Monitor Features at a Glance:
Frequency response: 34Hz-40kHz
Maximum SPL : 118dB SPL (peak @ 1m)
Dynamic range : 110dB
Amplification: Class D tri-amped (250W RMS low frequency, 150W RMS mid frequency, and 100W RMS high-frequency)
Bass transducers: Focal "W" cone 11" speaker with 11W5511B long throw magnet
Passive radiator: Focal "W" cone 11" passive radiator with 11WPP51 large surround magnet
Mid-range transducer: Focal "W" cone 6.5" speaker with a 6W0451 "push-pull" Neodymium magnet
Treble transducer: 1" Focal pure Beryllium dome tweeter, TBU SM11 Focus Ring magnet
Analog input: 1 x XLR analog input with sensitivity selector
Digital input: 1 x AES/EBU (over XLR) with left/right channel selector
Additional control: Control interface selector
Shielding: Complete with the magnet structure natural protection
Indicators: Power on LED, infrared reception LED
Focal Manager Software functions: Sound level, "Sweet spot", "Shielving" EQ, equalizer, pre-selection, and delays
Control system connection: RS-232 series infrared (PC/Mac), and MIDI
DSP/Conversion: 24-bit/44.1kHz, 48kHz, 88.2kHz, or 96kHz (automatic detection)
Electric supply : Local supply power: 230V (3.15A fuses) - 115V (6.3A fuse) IEC local supply wire
Finish: Slate grey metallic lacquer side panels, dark red veneering top and bottom panels, and tinted solid wood sides
Dimensions: 13.3" x 13.4" x 23.6"
Weight: 61.7 lbs.
Hear the detail and spacial imaging of your mixes like never before, with Focal SM11 studio monitors
For the complete list of
, enter your name and email address below.
Rupert Neve Designs 535 Diode Bridge Compressor
Online Payment System
Copyright © 2002-2018 Pro Audio Toys. All rights reserved.