The fast and sophisticated solution for Choir, Drums, and other acoustic instruments. Available in Cardioid (FW730) and HyperCardioid (FW730/HC)
The Earthworks FlexWand™ is a totally new concept in microphones. It is a combination of a 30kHz High Definition Microphone and a low profile microphone stand and boom as a single unit. It allows the microphone head to be positioned as high as 7 feet and as low as 1.5 feet from the floor or anywhere in between. Best of all there are no visible wires or cables above floor level. Visually it is low profile, smooth, sleek and clean. The FlexWand™ is the ideal solution for applications where the utmost in sound quality and a low profile is required. Now you don’t have to find a mic, attach the mic clip to the stand and then dress the cable around the stand. Just pick up the FlexWand, position it and plug the mic cable into the base. You are done! Best of all it is neat and clean visually with no unsightly microphone cable wrapped around the stand and boom. And, it sounds spectacular!
The Earthworks FlexWand™ has a large flex section near the center of the stand that couples the stand and the wand. There is also a mini-gooseneck between the end of the wand and the microphone head. The lower section of the stand is 3/4” in diameter and the 24 inch wand is 5/16” in diameter with a 4.5” mini-gooseneck connected at the end which connects to the High Definition Microphone head. The combination of a mid-flex section and the mini flex on the wand provide an infinite combination of placement options between 1.5 feet and 7 feet. Please refer to the application photos in the animated display on this page.