What we think:
The CS-47YJ does something almost magical to the T's and S's and breath of a vocalist that just turns everything to silk. A vintage U47 might come close, but a CS-47YJ definitely does it's own thing. No other mic sounds quite like this, and it's one of our all-time favorites.
Description:
The Model CS-47YJ takes its chassis (body) from the Standard ADK Model TT. The CS-47YJ uses a common back-plate, dual-active gold vapor-deposit diaphragm BK47 capsule which is patterned after the famous K47 capsule, as well as upgraded electronics, custom power supply, and a Jensen Transformer.
The CS-47YJ Class A Valve (Tube) Condenser exhibits a robust and linear low-end and slightly thick low-mids with pronounced but predictable proximity effect.
Additionally, the CS-47YJ creates a slight presence boost with sweet highs; a delight on any source material, but particularly on all vocalists: male/female, singers/broadcast talent.
The user can choose between a 12AX7A for high gain and low noise, or a 12AY7 for slightly less sensitivity, hence more headroom (both tubes are included). CS-47YJ's are built in the U.S.A. ADK Custom Shop.
Specs:
CAPSULE TYPE: True condenser pressure gradient; dual 1” six micron diaphragms
IMPEDANCE CONVERTER: 9 pin twin triode; one 12AX7wa and one 12AY7a included
POLAR PATTERN: 9 patterns including Omni, Cardioid, Figure 8 and 6 intermediate positions
SENSITIVITY: 15mV/Pa = -34dBV (0 dBV = 1v/Pa)
FREQUENCY RANGE: 20 Hz to 20k Hz
OUTPUT IMPEDANCE: < 250 Ohms
RECOMMENDED LOAD IMPEDANCE: > 1200 Ohms
MAX SPL FOR 1% THD @ 1000 Hz: 125 dB (with 12AX7 tube)
EQUIVALENT NOISE LEVEL: 18 dBA Typical (IEC 286-4) (with 12AX7 tube)
S/N RATIO @ 1Pa: 76 dB
POWER REQUIREMENT: Dedicated ADK “Custom Shoppe” power supply
REL. HUMIDITY: 90% (C) / 85% (C)
CONNECTOR: 7 pin multi-pin cable (supplied)
SIZE: Diameter 53mm (2.1”) Length 225mm (8.9”)
NET WEIGHT: 750gm (26.5oz)
If you already own an ADK CE or TT, you can upgrade to the new CS-47YJ. Contact Us for details.
FREE Insured Air Shipping In Stock
|